Correct Abrasive Hose End Installation
It is important that the Abrasive Hose End is fully inserted into the Cutting Head as well as the Abrasive Catcher on the other end. The WAZER sucks up a carefully metered amount of abrasive from the Abrasive Hopper. So, if there is any air leak, the abrasive rate will reduce and the cut performance will be degraded
Insert the Abrasive Hose End into the cutting head fully so that neither of the black o-rings is showing.
Make sure that the o-ring does not show but there should still be some of the stainless steel showing.