Quick Drain

This is our internal easy way to lower the WAZER water level a little bit.

No tools needed


1. Remove Right Side Cover and identify the the Dump Valve


2. Select Setup & Maintenance > Maintenance > Used Abr. Collect.

3. Locate the Dump Valve and press the “button” (the center of the valve) to manually open the valve


4. Continue to hold until the water level is where you desire.

Note: the water level can only be lowered as far the level of the drain filters. To drain the tank please follow the guide in the Tank Draining - Siphon Method

5. Replace the Right Side Cover