Maintenance

General upkeep of WAZER.

Like any machine, WAZER will require maintenance for proper operation. Please familiarize yourself with this section so you will know how to keep WAZER in optimal condition.

[WARNING]
Basic Safety Directives

  • If WAZER was abruptly shut down or turned off, perform a Nozzle Purge by navigating to Setup & Maintenance > Maintenance > Nozzle Purge on the Control Panel. This releases high pressure from the system.

  • Before servicing WAZER always:
    • Purge the high pressure by properly ending/completing a cut or performing a “Nozzle Purge” from the maintenance menu.

    • Turn off the On/Off Valve or water supply to the machine.

    • Turn off WAZER and disconnect AC power from WAZER and the Pump Box.

  • Turn off the WAZER and disconnect AC power from the WAZER and the Pump Box.
  • Never remove the cover of the Pump Box while it is plugged in.

Setup and Maintenance Menu

Most of the operations during Maintenance Procedures will be found in the Setup & Maintenance section of Control Panel.

Maintenance Schedule

Please follow the provided Maintenance Schedule for your WAZER. If you do not abide to the regular maintenance procedures and schedule, the warranty and support for your WAZER will be void.

After understanding maintenance procedures for your WAZER,  dive into some quick troubleshooting tips.