WAZER Workflow

Here are the basic steps for cutting on WAZER:

  1. Design a part to cut on WAZER. Once the Design is complete, export a .dxf or .svg file of the 2D part (or multiple parts to be cut from a single sheet)

  2. Import the file(s) into Wam (WAZER’s software). Now you will prepare to cut your part in a Material; you’ll specify the Material, thickness, and desired Cut Quality.

  3. Use Wam to turn your Design into instructions that WAZER understands. Just transfer this Cut File onto an SD Card and plug it into WAZER. You’ll use the Control Panel on WAZER to select this file for cutting.