Abrasive Out Flow is Weak
Weak abrasive flow can be a symptom of a few different problems. Not only does it make it harder to get spent abrasive out of your machine it can also affect the smooth running of your WAZER.
Used Abrasive Collection
One of the most convenient features of WAZER is that it removes the Used Abrasive from the tank. The system will require some regular maintenance to keep it running smoothly. When things aren’t working as expected this section will help you diagnose what is not working and point you to resources to get things running smoothly.
Strong Flow With No Abrasive
The situation can exist where you see a strong flow of water out of the Used Abrasive Grommets but there is no abrasive in the stream. This could just be a simple fix, or it could be indicative of a larger problem in your Used Abrasive system.
Trouble Getting Abrasive Buckets In
Abrasive can build up underneath the Abrasive Collection Buckets during normal use. This can make it difficult to get the buckets back in after disposing of Used Abrasive.
Low Used Abrasive Collection Rate
After a Cut you may notice that the amount of Used Abrasive collected in the Used Abrasive Buckets is lower than you would expect. It may be the case that after a Cut, there isn’t any Used Abrasive in the Buckets. This is not normal behavior; there are some things you can do to help improve the Used Abrasive collection of your WAZER.