Troubleshooting
Like any machine WAZER will occasionally have issues. Explore common problems and their solutions.
Powering Up & Turning on the Machine
This section will help you diagnose problems with your WAZER not turning on, intermittent power, or issues with tripping breakers.
Error Messages
An overview of Control Panel servicing or error messages you may encounter while running your WAZER. This section will help you diagnose the problem when you see an error message.
Cut Performance
This section will help you diagnose the problem and point you to solutions for when your WAZER isn’t cutting like you would expect it to.
Leaks
This section will help you when there are leaks from your machine. How to find the source of the leak and how to either fix or replace the part causing the problem.
Used Abrasive Collection
One of the most convenient features of WAZER is that it removes the Used Abrasive from the tank. The system will require some regular maintenance to keep it running smoothly. When things aren’t working as expected this section will help you diagnose what is not working and point you to resources to get things running smoothly.
Motion System
This section will help identify the root cause of your problem when you notice a problem in the way the Wazer moves the Cutting Head
Water Level Management
This section will you to identify the root causes when the water level in the tank is abnormally high or abnormally low. Suggested solutions are also provided.
System Flowcharts and Diagrams
Identify Sub-systems within the WAZER!
[WARNING] Before servicing WAZER:
Turn off or close the On/Off Valve or water supply to the machine.
Purge the high-pressure system by properly ending/completing a cut or performing a Nozzle Purge.
Turn off WAZER and disconnect AC power from WAZER and the Pump Box.
Never remove the cover of the Pump Box while it is plugged in.