Interval: 20-100 hours
(350 – 1,650 lbs. of abrasive)
[NOTICE] When performing Service, Maintenance, or Repair, use ONLY identical replacement parts provided by WAZER.
[WARNING] WAZER DOES NOT track the number of hours it has been running. To ensure a safe and reliable machine, you MUST track your WAZER's run time so that you may perform preventative maintenance as required in this User Manual. If you do not abide by the regular maintenance procedures and schedule, the warranty and support for your WAZER will be void.
Before servicing WAZER:
Purge the high-pressure system by properly ending/completing a cut or performing a Nozzle Purge.
Turn off or close the On/Off Valve or water supply to the machine.
Turn off WAZER and disconnect AC power from WAZER and the Pump Box.
Never remove the cover of the Pump Box while it is plugged in.