Door Switch Magnet Adjustment

If the Wazer Displays a “Close Door” error despite the door being closed, the door window magnet likely needs to be adjusted. The Door Safety switch is triggered by a magnet that is hidden the rubber gasket along the lower edge of the door window.  Sometime over normal use or if the area gets bumped the magnet can shift slightly and a no longer trip the switch. 

Tools Required

  • ≥6mm hex key

Procedure

 
1.    Locate the magnet in the front rubber trim located on the bottom lip of the front of the door window.  The magnet is located near the end of the right side.
 
WZR00572.JPG
2.  Stick the end of the Hex key to the magnet and use it to pull the magnet out towards the end of the rubber seal.    The magnet should sit ~5mm from the end of the trim piece.
 
WZR00575.JPG